Memory Lane: Bumbershoot Festivals & Defensive Driving

Memory Lane: Bumbershoot Festivals & Defensive Driving


Part one of this series here.
It’s been a few weeks since the anger over losing my beloved F-150 has faded, as if losing my truck was more important than the fact that I was not seriously injured. According to the United States Department of Transportation, male drivers aged 16 to 29 are the most dangerous people on the road.
The guy who hit me and totaled both vehicles in the process was 28.
As much as I want to be in denial about it, I was a young driver and fitted that category perfectly. My angst towards the guy subsided when I remembered the accidents I had caused, and how I became more respectful of the machines I drove over time.
Forty Dollar Folly
When I was 18, or so, I borrowed a co-worker’s 1965 Plymouth Valiant with a push button transmission. It was black with red interior. I lived up north and was driving on a clear road, except it was covered with black ice. Due to my inexperience, I failed to recognize it and lost control of the car. I ended up down an eight-foot embankment, the car smashing dead on a boulder. The rock didn’t move, but the front of the car was pushed back quite a ways and it was totaled.
I only suffered a scratched knee when it busted the 8-track tape.
Of course, there was a cost to my poor driving and I had to reimburse my co-worker for what the car was worth to the tune of $40.00 per paycheck, a lot back then. I felt bad about the whole thing, but at least there was no one else involved in the crash. After that, I was a little less careless. I would have the occasional distraction, like hitting the rear bumper of a car waiting at a yield sign when I was too preoccupied to see if the road was clearing up so I could get on the freeway.
But I still drove too fast, especially in wintertime, and would lose control of my car once in a while and hit a curb.
According to Safety Insurance, at least 77 percent of traffic accidents are the result of driver error. Photo: Pexels.


Proactive Position
I became much more responsible when I had the good fortune of taking a defensive driving and skid control course. It is one of the best courses I have ever taken, still putting into practice what I learned so many years ago. The main thing I realized is I was following too close, and I can see to this day how many people tailgate. The other thing I realized was an overconfidence in the braking ability of cars. Aside from driving too closely and having little time to react, braking also takes time.
From the moment your brain tells your foot to switch to the brake pedal, it may already be too late. So, I’ve learned to keep my distance, at least three seconds behind, not two, and to know the limits of the car, and not just in terms of braking. Speeding was the last thing to be stricken off my list of do’s and don’ts. I even lost my driver’s license because of too many speeding tickets.
Wintertime Woes
The defensive driving course helped me countless times. There was a particular trip in winter when the sun was shining. I was driving a 1989 Thunderbird LX, climbing a hill next to a large body of water. The combination of moisture from the lake, sun, and cold air had turned the road into an ice rink. On the other side of the hill, I came upon a surreal sight. At least a dozen vehicles had skidded off the highway. There was a Greyhound bus way out in the field, the driver outside waiting.
None of the cars had overturned and no one was injured. They were waiting for the police and tow trucks to come along.
There was no one else on the actual road except me. I decided not to stop and made the conscious effort to stay away from the brake pedal. Had I stopped, I would likely have ended up off the road, or been an obstacle for future traffic since there was not enough space on the shoulder. Besides, there was nothing I could do and there were enough people around to help one another. I glided safely past this particular spiderweb of winter and eventually to the ice free pavement up ahead.
According to AAA Exchange, applying the gas slowly to accelerate is the best method for regaining traction and avoiding skids during wintertime driving. Photo: fancycrave1.
Weekend Outing
Another time, I was driving my friend’s Chevy Lumina on the I-5. We were off to Seattle to attend Bumbershoot over Labor Day weekend. My friend was up front in the passenger seat and his two sons were in the back seat. The traffic was heavy, but we were making good time by staying in the left lane. All of a sudden, a Honda Accord positioned in the center lane loses a wheel. The Accord does a 180 but stays in its lane coming to a stop. The driver, still wondering what had happened, was now fearful of being hit head-on by the cars following behind.
I drive past the Accord, still in the left lane, but the wheel was bouncing ahead. It’s all happening at 60 mph too. We don’t know where the wheel is going to end up and a guy driving a Grumman van in the slow lane doesn’t know either. He is afraid of getting hit by the wheel and as he tries to avoid it, makes his way through the center lane and into our lane. We are gradually being squeezed between the van and the median barrier. I apply the brakes slowly and manage to avoid the barrier and the van. Thank you, defensive driving course.
We made it okay to our hotel near Seattle Center. I particularly enjoyed the Brazilian Girls, the New York Dolls, and the icing on the cake, Iggy Pop and the Stooges. “I want to be your dog.” Yeah, man! If you’ve never been to Bumbershoot, it’s worth putting on your bucket list.
Seattle Skyline. Photo: Unsplash.


Mindful Considerations
I cannot count the number of times the skills I learned during that course helped me out of jams. It seems too easy to obtain a driver’s license. At least it was when I started driving. I’m not judging. I was an overconfident and irresponsible driver in my youth. When young, we think of ourselves as invincible and oftentimes, we carry that to our senior years, especially when we sit behind the wheel.
In fact, a refresher course should be mandatory for all seniors of a certain age. I know so many “old guys” who should not be driving, but won’t give it up. They will lose their freedom, maybe their identity if they stop driving. For the young, defensive driving should be greatly emphasized as it teaches respect for a vehicle, something we all should have the moment we grab onto those handlebars or that steering wheel. This is challenging to inculcate since today’s cars are much safer and reliable, which only adds to the false sense of security.
Michael Bellamy is the author of our Memory Lane series. He enjoys driving his 1997 Lincoln Mark VIII LSC and until an untimely collision claimed it, his 2001 Ford F-150 7700. 
Cover Photo: Pexels.



Check out these Automotive tips

Powered by WPeMatico

http://carsecret.atspace.eu/blog/memory-lane-bumbershoot-festivals-defensive-driving/

2018 Audi S5 Sportback: The Semi-Sleeper In Wait

2018 Audi S5 Sportback: The Semi-Sleeper In Wait

Audi says the 2018 S5 Sportback “leads the segment in performance,” and who am I to disagree? My question is: what segment is that, exactly? The semi-big coupe, mid-hatchback segment, I suppose?
And it’s not like I’m really complaining here, it’s just the Audi 5 Series really doesn’t need much dodging around when it comes to performance. Audi has, for a while now, pretty much stolen the march on other German car brands, in terms of leveraged performance.
They’ve pretty much owned Le Mans for a very long while, and they show no hesitancy when it comes to putting performance stuff into their road cars. Ergo, the S5, the more performance oriented version of the A5 coupe, is no slouch in either in the go/turn/stop departments.
Power & Performance
Audi’s 2018 S5 Sportback has an all-new 3.0-liter TFSI V6 engine living under the hood. It produces a rather vigorous 354 horsepower and 369 lb-ft. of torque. That power band spreads from 1,370 to 4,500 rpm, which is nice and mesa-like. Power from the V6 plant gets to the bahn via a newly prepared eight-speed Tiptronic automatic transmission, optimized for the V6’s low-end torque.
The 2018 S5 Sportback blastoffs from 0 and hits 60 mph in 4.5 seconds, topping out at 155 mph when equipped with summer performance tires. Not bad, not bad at all. The standard Audi drive select comes with four different modes: comfort, auto, dynamic, and individual. S5 Sportbacks come standard with quattro all-wheel drive, because, duh.
Photo: Audi of America, Inc.
Styling & Design
There’s a wider, flatter Singleframe grille (yes that’s one word, and yes, Audi went and registered it, and yes, I think that’s overreaching) and a longer, lower hood line to highlight the V6 mill. The wave-design shoulder line is more distinct than earlier generations, and there are wider wheel arches. The slim sculptural LED taillights are joined by a horizontal design line to offer a markedly muscular look, and to emphasize vehicle width.
The S5 Sportback is recognizable by its aluminum-optic side mirror housings, the Platinum Gray Singleframe grille with aluminum-optic double horizontal blade bars, S model specific rear diffuser with honeycomb structure, and quad exhaust outlets with chrome tips. Consider it a semi-sleeper.
Interior Treatments
The sophisticated interior of the S5 has seating for up to five, as long as the backseat passengers are not NBA hopefuls or typical Wal-Mart shoppers. There’s three-dimensional decorative inlay trim with climate control integration that spans from the door panels and across the dashboard. There’s also 35 cubic feet of cargo capacity with the rear seats folded down.
Photo: Audi of America, Inc.


Standard Equipment
The list of standard equipment for the all-new S5 Sportback is rather extensive, but the high points include full-LED headlights, the aforementioned drivetrain, a leather/Alcantara trimmed interior, heated eight-way power front seats with four-way power lumbar support, and driver’s memory. The seats are diamond stitched with power side bolsters and massage function.
Other niceties include a power sunroof, power tailgate, and three-zone automatic climate control with digital rear display.
Optional Features
Options? Oh yeah, you got options. 19-inch 5-spoke-cavo design wheels with summer performance tires, a full-color heads up display, tunes via a Bang & Olufsen sound system with 3D sound, and Audi MMI touch with handwriting recognition. Yeah, I don’t get why it needs handwriting recognition either, and good luck recognizing mine, bub.
The driver assistance package includes adaptive cruise control with traffic jam assist, Audi active lane assist, high beam assistant, and traffic sign recognition (cause you’re a distracted baboon and need all the assistance you can get). A heated, 3-spoke steering wheel with shift paddles are part of the cold weather package, as are heated rear seats. The warm weather package gets you ventilated front sport seats.
Photo: Audi of America, Inc.
Pricing & Trim Levels
Pricing? Well, that’s where the bad news starts.
The dollars start flowing right away for the 2018 Audi A5 Sportback: $42,600 for the Premium level, all the way up to $66,700 for the 2018 S5 Cabriolet in Prestige trim, which is about what a new Corvette costs. And I highly recommend you think about that for a bit. The middle of the road, pricing-wise, seems to be the S5 Coupe starting at $54,600. But still, that’s not out of the ordinary for the market and for what Audi is bringing to the table here.
If you go for the S sport package you get red brake calipers, sport adaptive damping suspension, and rear sport differential, and really, you should go for this. Don’t be a poseur – go and get all the performance goodies you can.
Tony Borroz has spent his entire life racing antique and sports cars. He means well, even if he has a bias towards lighter, agile cars rather than big engine muscle cars or family sedans.



Check out these Automotive tips

Powered by WPeMatico

http://carsecret.atspace.eu/blog/2018-audi-s5-sportback-the-semi-sleeper-in-wait/

McLaren 720S: The Logical Progression

McLaren 720S: The Logical Progression

After monkeying around, McLaren has finally released the specs on its 720S supercar, and it’s pretty amazing. It seems to be a logical progression from McLaren’s 650S, which was a logical progression from the MP4-12C. But logic, schmogic, the McLaren 720S can haul the mail.
First off, that name. Yes, it’s a number, and not a name (minus points for that) but that 720 does not refer to the engine displacement. Which is kind of sad, really, cause a big, whompin’ 7.2 liter V8 in the back of this thing would have been so much fun, a la the 1960s McLaren CanAm cars.
Power & Performance
No, the “720” is actually the power output of the thing. Yes, that’s the power output in European standards. The good ‘Murican horsepower figures are 710. Which is, and not to use too technical of a term here: a LOT!
The main figures breakdown thusly: 710 bhp at 7,500 revs and 568 lb-ft. of torque (5,500 rpm). Like I said, that’s a lot. Especially given how little this thing actually tips the scales. That would be 3,128 pounds at the curb (or 1,419 kilos for you metric types out there). Combine those hard points for the golden calculation that is power-to-weight ratio, and you don’t have to be Isaac Newton to figure out where this is going.
0-60 mph comes up in a searing 2.8 seconds, 0-124 mph is reached in 7.8 seconds, with a maximum speed of 212 mph. Quick and fast, no? These numbers spool out thanks to the new M480T engine powering the 720S. It’s a 4.0-liter twin-turbocharged V8, with power and torque fed to the tarmac via a 7-speed semi-auto box.
Every road car built by the British manufacturer since the McLaren F1 in 1993 has utilized a carbon fiber chassis. The same is true for the new 720S. A range of aluminium alloys are also used extensively in the chassis, as well as for some body panels. Photo: McLaren Automotive.


Handling & Aerodynamics
The architecture of the 720S is based around a new carbon fiber “tub” and upper structure, which McLaren refers to as the Monocage II. Essentially, it’s both the tub and a roll cage in one combined piece. It is extremely strong and rigid. McLaren doesn’t give specific torsional rigidity figures, but c’mon, these are the people who first used carbon fiber in a car – any car – back in their John Barnard era.
Handling, something the Brits have always excelled at, comes courtesy of McLaren’s Proactive Chassis Control, a new suspension design and McLaren’s power-assisted, electro-hydraulic steering. Grip? By the metric tonne. Balance? Like a Romanian gymnast on the uneven bars.
A interesting feature, design-wise, about the 720S is the lack of radiator intakes on the flanks of the car. They get cold air over the radiators via the unique “double-skin” aerodynamic shape of the dihedral doors. This channels air to the high-temperature heat exchangers for cooling the mid-mounted engine.
Interior Treatments
The interior is anything but Spartan. There’s yards of fine leather and lots of machined aluminum throughout the cabin. The new McLaren Driver Interface contains a Folding Driver Display and Central Infotainment Screen. The cabin offers excellent visibility, more space than you’d think, and a great deal of comfort.
Pricing & Availability
You can order a new McLaren 720S now – the first customers are expected to receive their cars in May. Price? A not all that unreasonable £208,600, which is around $250,000 USD. Three grades of the car are available, with different performance and luxury trims to suit a variety of tastes.
I’ll take mine in Papaya Orange, mate!
Tony Borroz has spent his entire life racing antique and sports cars. He means well, even if he has a bias towards lighter, agile cars rather than big engine muscle cars or family sedans.
McLaren 720S Gallery


























Photos & Source: McLaren Automotive.



Check out these Automotive tips

Powered by WPeMatico

http://carsecret.atspace.eu/blog/mclaren-720s-the-logical-progression/

2012 Aston Martin Vantage S 2012 Aston Martin V8 Vantage S Coupe 4.7L DOHC 32-Valve V8 Engine Automatic AM R

2012 Aston Martin Vantage S 2012 Aston Martin V8 Vantage S Coupe 4.7L DOHC 32-Valve V8 Engine Automatic AM R
$15,300.00 (58 Bids)
End Date: Monday Jun-3-2019 16:44:57 PDT
Bid now | Add to watch list


Powered by WPeMatico

http://carsecret.atspace.eu/blog/2012-aston-martin-vantage-s-2012-aston-martin-v8-vantage-s-coupe-4-7l-dohc-32-valve-v8-engine-automatic-am-r/

Eliminate Nasty Rock Chips With The Right Touch-Up Paint: Here’s How

Eliminate Nasty Rock Chips With The Right Touch-Up Paint: Here’s How My wife has a car that goes through the paces here in Michigan. Maybe you know the feeling as well with your own vehicle. She commutes to work about 60 miles each day, round trip, and has done so for the last several years. The miles bring with it a plethora of dents and dings and scratches, with rock chips especially common as a result of her frequent highway driving. Those who live in Midwestern states know the salt wreaks havoc on your paint too; and this past winter felt like a long one.
A Rocky Outcome
Those chips and dings are affecting your car’s curb appeal in the short term, but more importantly, its resale value in the long run. When you trade your car in, dealers look at the exterior condition as one of the factors in determining what they will pay you for it. It’s best to take care of these pesky rock chips and dings as they come up. After working with Robert’s Paint Care recently, we believe their products, when used properly, can help preserve the resale value of your car.
Disclosure: This article is sponsored by Robert’s Paint Care. The products below were sent to me at no charge. The views and opinions expressed here are strictly my own and do not necessarily reflect the views and opinions of Automoblog. For more information, please review our advertising guidelines. 
From The Family Line
Robert’s Paint Care sent us a sample of their Automotive Touch Up Paint to use on my wife’s car. The company started in 1962 as a provider of automotive finishes, mainly to car dealerships and body shops. By 1990, Robert’s Paint Care expanded into the industrial and manufacturing sector; for the last ten years now, the family-run company has gained traction in the consumer market with products like the Automotive Touch Up Paint they sent us. Robert’s Paint Care uses Sherwin-Williams paint for all of their touch-up products, and offers detailed video instructions for more complicated repairs.
Robert’s Paint Care provided us a 12 oz. bottle (their largest) and a smaller bottle of sterling gray paint, which matched the color of my wife’s car. The bottle of the latter is just 2 oz. by comparison; it looks and feels small, but the reality is, that little bit will go a long way. Together with the 12 oz. bottle of aerosol clear coat, it should last you the life of your vehicle. This was a relief for me. Let’s just say, that when I really started looking, there were more rock chips on my wife’s hood than I originally thought.
Three Different Sizes
The 2 oz. bottle of paint includes a brush and with it, three different aerosol spray cans: the 4.5 oz., the 9 oz., and the 12 oz. The aerosol clear coat is applied after the paint in the smaller bottle. The smaller bottle and brush is ideal for those minimal touch ups, like the rock chips we have been discussing. Both bottles come with their own individual brush as to not contaminate them. Pricing ranges between $16.95 and $35.95, depending on how large of a bottle you need.
Robert’s Paint Care provided us a 12 oz. bottle of aerosol clear coat (left) and a smaller bottle of sterling gray paint, which matched the color of my wife’s car.
Application & Use (How We Eliminated Our Rock Chips)
Even if you’ve never worked with touch up-paint before, the brushes provided by Robert’s Paint Care make it easy to fill in chips and dings. While we had a paper towel handy to dab any excess off the brush, for the most part, the brush holds the paint in place. This is nice because I didn’t have to worry about the paint dripping on other parts of the car while I was working. I was able to go slowly as I applied each layer.
After you apply the paint from the 2 oz. bottle, Robert’s Paint Care suggests waiting for 15 minutes before applying the clear coat from the aerosol can. After that time has passed, spray the contents of the aerosol clear coat into a separate or even a disposable container. Note that it will dissolve Styrofoam (and quickly) so opt for a good durable plastic or metal. Once you have the liquid in your container, you are ready to apply the clear coat over top of the paint from the 2 oz. bottle.
Here are the official instructions Robert’s Paint Care sent us:
Dip the brush in the 2 oz. bottle of paint and apply to the clean surface of the car.
After 15 minutes, spray the clear coat (12 oz. bottle) in a smaller, separate container or cap.
Use the brush to apply the clear coat over the top of the previous layer of paint.
When applying the touch-up paint, take your time and go slowly.
An Added Bonus
The 2 oz. bottle of paint matched really well, something that’s easy to be leery about when it comes to touch-up paint. Automotive paints are specific and even the slightest difference in shade and hue is noticeable. I gave Robert’s Paint Care the code on the door jamb, and was relieved to find it was a perfect match when I started working. Just do the same when you contact them. Rest assured, it will be the exact color.
Rock Chips (Before Robert’s Paint Care Helped Us)
The rock chips on the hood are a result of my wife driving about 60 miles round trip on her daily commute.
And After: Night & Day Difference
The next morning you could not tell we had applied the paint the night before.
The Total Package
For those who are completely DIY when it comes to their car, Robert’s Paint Care offers a host of professional-grade products, from blending solvents and polyester finishing putty; to resin fiber discs and waterproof sand paper. Their comprehensive touch-up and repair kits include one for cracked bumpers; another for deep scratches, and another yet for perforation caused by rust.
However, for the average chip and crack, what we are reviewing here is plenty.
With regard to the Automotive Touch Up Paint specifically, it’s something both professionals and the everyday driver can use. It’s fairly straightforward in its application, but has the type of quality you would expect in a body shop or dealership. As we were applying the paint to our rock chips, my wife said it was as easy as “using nail polish.”
Robert’s Paint Care offers a host of professional-grade products, including this bottle of touch-up paint we used on my wife’s car.
Putting It All Together
Last – but not least – the biggest benefit we found working with Robert’s Paint Care was how friendly they were. Seriously. That goes a long way with us car folk. Prior to receiving the products for this article, I had a few questions about touch-up paint in general. It’s been some time since I was a young service advisor. And even then, I was in the service drive and not the body shop. I kept thinking I was somehow going to mess up when it came to applying the paint.
However, the rep from Robert’s Paint Care was friendly and patient with me, and we have every reason to believe they would be with you. We would recommend their Automotive Touch Up Paint for those unsightly dings, dents, and especially rock chips.
Carl Anthony studies mechanical engineering at Wayne State University, serves on the Board of Directors for the Ally Jolie Baldwin Foundation, and is a loyal Detroit Lions fan. Before going back to school, he simultaneously held product development and experiential marketing roles in the automotive industry. 



Check out these Automotive tips

Powered by WPeMatico

http://carsecret.atspace.eu/blog/eliminate-nasty-rock-chips-with-the-right-touch-up-paint-heres-how/

2018 Audi S4: A Thorn In The Side For Much Bigger Cars

2018 Audi S4: A Thorn In The Side For Much Bigger Cars

Ah, the 2018 Audi S4, continuing proof that good things come in small packages. Yes, I know, they’ve gotten bigger since the first iteration, and yes, I know, they are more complex than they used to be, but these little brutes are still a total hoot, and giant killers to the unsuspecting.
The recipe applied to the Audi S4 is one as old as time, or, more accurately, as old as the automobile itself: Step 1 – Find a small car; Step 2 – Find the biggest motor that will fit into the engine bay of small car (see Step 1); Step 3 – Stuff big engine into small car; Step 4 – Enjoy!
Step 5 is optional: Have contact info of Priest, Rabbi, Minister, or Mortician handy.
Not So Ordinary
Audi has been at this for a time, with varying degrees of success/reliability/sanity. Didn’t they cram a little V8 into an S4 at one point? Or was that the RS? At any rate, the S4 stands as both a too fun car to drive and a testament that Audi is anything but a stodgy, engineering-based German car company. Remember, these are the yahoos that created the Sport Quattro S1 E2 and handed it to non compos mentis types like Walter Röhrl and Michèle Mouton and said, “see how fast you can make it to the top of that mountain.”
They were also the same people that put the drivetrain from the Allroad into an S4, and, c’mon, that’s kind of dumb (from a reliability standpoint).
Right, so here we are with the new, 2018 Audi S4.
Engine & Transmission
The new for 2018 S4 is driven by 3.0-liter TFSI V6 engine, tweaked to deliver more horsepower and torque. Specifically it cranks out 354 horsepower and 369 lb-ft. of torque. That is, technically speaking, a lot of power and grunt from such a small package. Audi says it’s up by 21 horsepower and 44 lb-ft of torque from the previous engine. It’s also worth noting how the power band is nice and wide, from 1,370 to 4,500 rpm.
The supercharger from the previous generation is gone, swapped for a single turbocharger to force induction.
The mill is connected to a standard eight-speed tiptronic automatic transmission, with lower gears featuring short, sporty ratios and longer upper cogs to help keep engine revs lower at cruising speeds.
Like I should even have to point this out, but all Audi S4s come standard with the quattro all-wheel drive system. Not only is this a given, but it also makes sense in putting all that power and torque to the bahn. It also ensures you’ll fire off the line like a bug with a Claymore mine strapped to its butt. Out back there’s an available Quattro sport rear differential, actively splitting torque between the rear wheels.
These things combined help the 2018 Audi S4 hit a class-leading and dynamic 0-60 time of 4.4 seconds. And speaking of dynamics, the chassis and suspension have been worked over too.
Photo: Audi of America, Inc.
Ride & Handling
For starters, there is the standard Audi drive select that gives you four different modes to choose from: comfort, auto, dynamic, and individual. These permit the driver to change shift points, alter steering and throttle response, and other available settings, as well as adjust the adaptive cruise control. There’s an optional sport adaptive damping suspension package with a new suspension control unit too.
You can also opt for something called dynamic steering, which gets you a variable steering ratio based on vehicle speed and the Audi drive select setting.
Exterior Styling
Design-wise the 2018 S4 gets the “latest refinements” so it stays current with the rest of the Audi line. I’ll leave that up to the eye of the beholder whether any of that works or not. Naturally, since this an S4, you get the aluminum-optic exterior side mirror housings, Platinum Gray Singleframe grille with aluminum-optic double blade bars, S model specific quad exhaust outlets, and a rear trunk lid lip spoiler.
Subtle, but enough is there to let the cognoscenti know what they’re dealing with.
You also get 18-inch 5-double-spoke-star design wheels with standard summer tires. There’s also (optional) 19-inch 5-spoke-V design wheels with summer tires if that’s your thing. Full LED headlights with LED daytime running lights and LED taillights with dynamic turn signals are standard. Also standard are auto-dimming, power folding, heated exterior mirrors – t here are optional red brake calipers in the S sport package if you’re a bit more on the flashy side.
Photo: Audi of America, Inc.


Interior Design
On the inside there’s a 3-spoke multifunction flat-bottom steering wheel with shift paddles and S badging. The eight-way power front seats with four-way power lumbar support and memory are heated. The seats are actually really fancy: they are diamond stitched S sport seats with power side bolsters, and a massage function. Also standard is three-zone automatic climate control with digital rear display; dual pane acoustic glass for the front side windows is optional.
Finally, a Bang & Olufsen stereo with 3D sound is available.
Trim Levels & Pricing
The 2018 Audi S4 comes in two basic flavors: Premium Plus and Prestige. They will set you back $50,900 (USD) for the Premium Plus and $55,800 for the Prestige. Yes, that’s a lot, but even at that price, it’s a hard little car to argue with.
Tony Borroz has spent his entire life racing antique and sports cars. He means well, even if he has a bias towards lighter, agile cars rather than big engine muscle cars or family sedans.
Photos and Source: Audi of America, Inc.



Check out these Automotive tips

Powered by WPeMatico

http://carsecret.atspace.eu/blog/2018-audi-s4-a-thorn-in-the-side-for-much-bigger-cars/

AutoSens Detroit Conference Examines Vehicle Perception Technology

AutoSens Detroit Conference Examines Vehicle Perception Technology


One of the hottest topics right now in the automotive universe is autonomous driving. It’s also one of the most misunderstood. Proponents believe the forthcoming technology holds much promise, citing how autonomous cars usher in everything from zero emissions to better infrastructure.
Grease knuckled gear heads and car enthusiasts feel their prized small block V8s, pavement twisting muscle cars, and short-throw manual transmissions are going the way of the dodo.
Today’s engineers are riding this delicate balance; challenged with keeping a given automobile’s performance benchmark in tact, while implementing the latest advanced driver assistance systems. This is where AutoSens plays a critical role. Their conference in Detroit, Michigan this May is dedicated to engineers in the field, working on these different applications.
Passion & Value
AutoSens Detroit will provide a wide range of educational, networking, and hands-on experiences with regard to engineering the modern advanced driver assistance system. According to Robert Stead, Managing Director, Sense Media, AutoSens was built on the vision of senior technical experts at automotive OEMs and Tier 1 suppliers. That vision is then delivered at the conference by passionate experts who believe a strong community dialogue is ultimately necessary for the success of the technology.
“What we want to create is a community catered to the engineers who are working on advanced driver assistance systems, and other solutions to autonomous vehicles that will be integrated over the coming years,” Stead explained.
Sense Media launched in 2015 and held the first AutoSens conference in Brussels, Belgium. Stead points to how the evolving autonomous landscape, from digital imaging technology to cameras and radar shaped AutoSens.
“I decided two years ago the best way to serve that community was to set up my own business and focus entirely on digital sensing as a whole,” he said. “We place great importance on keeping the discussion relevant to engineers, upholding technical standards, and adding value for attendees.”
AutoSens Detroit takes place at the M1 Concourse, May 22nd through the 25th. Organizers are leveraging their existing good relationships with Detroit-based companies to put together a thought-provoking and exciting event. For Stead, having an AutoSens conference in Detroit is even a little personal.
“I went on a holiday there with some friends and I was really inspired to hear the stories of regeneration in Detroit,” he said. “I am a techno and house music fan too, so we attended the Movement Festival.”
Sense Media Managing Director Robert Stead addresses those in attendance at AutoSens Belgium. Photo: Sense Media.
Collective Voices
The speakers at AutoSens Detroit are as diverse as they are distinguished. Collectively, the panel has experience in everything from robotics and computer vision, to automotive electronics, digital imaging, and functional safety. Each speaker was handpicked and selected carefully based on their contributions to advanced driver assistance systems, functional safety, autonomous driving, and their overall passion for the topics.
“It is important to have the right caliber of speakers and be covering the right topics in Detroit,” Stead said.
The AutoSens Detroit panel includes Todd Benoff, Partner, Products Liability Practice Group, Alston & Bird. Benoff will host a session on insurance and liability and what the ethical considerations are for autonomous cars. Filip Geuens, Chief Executive Officer, Xenomatix, will facilitate a session on affordable, effective LiDAR solutions backed by real-world autonomous tests. Other speakers include Rudy Burger, Managing Partner, Woodside Capital Partners, with a session on the ever changing dynamics in the autonomous vehicle landscape, and Paul Fleck, President of Dataspeed, with insights on how to build an autonomous vehicle.
“For engineers who are working in this space, it’s an opportunity to come and hear about some of the things that are happening,” Stead said. “AutoSens is meant to help them to understand what is going on in the wider industry.”
AutoSens roundtable discussion in Brussels, Belgium. Photo: Sense Media.


Collaboration & Community
Indeed, the forthcoming autonomous era holds much promise, but right now we are still anticipating the many things that may (or may not) happen. Like a runner before the gun fires, we are poised and ready, having prepared long and hard for the finish line sprint. What we sometimes forget is how there are many others running alongside us. Your vision for the autonomous world may be remarkably similar to someone else in the field, but up until now, there was no way to meet them.
That’s the greatest value for those attending AutoSens, be it in Detroit or Brussels. It’s not simply a conference where you attend a couple of workshops, scribble down a few notes, and leave. AutoSens is about the community of people who share the same passion and drive for this bold, forthcoming autonomous generation. AutoSens brings us together so we can collectively implement the solutions necessary to welcome in what we all believe is a better era, not just for transportation, but society as a whole.
“The goal of all this technology is to improve safety,” Stead explained. “In order to do that, we need to have more conversations and collaboration, and what we have managed to create is an environment where that happens.”
AutoSens Detroit takes place at the M1 Concourse in Detroit, Michigan, May 22nd through the 25th. Automoblog readers receive a discount on their tickets through this special offer.
Carl Anthony is Managing Editor of Automoblog and resides in Detroit, Michigan. 



Check out these Automotive tips

Powered by WPeMatico

http://carsecret.atspace.eu/blog/autosens-detroit-conference-examines-vehicle-perception-technology/

High-Strength Steel: The Ally of Autonomy

High-Strength Steel: The Ally of Autonomy


The technology necessary for autonomous driving usually hinges on some common elements. For example, radar, cameras, LiDAR, and other various sensors are usually present. We hear about advanced algorithms, adaptive learning, and artificial intelligence, all of which are necessary for this new, promising era of driving.
Proponents say autonomous cars bring better infrastructure, reduced emissions, and the end of traffic fatalities. Massive events like the North American International Auto Show reflect just how far this technology, and its promises, have progressed.
It doesn’t seem like the future anymore because it’s already here.
Education & Utilization
Without one of the longest-standing industries within the automotive landscape, this bold autonomous world would come to a screeching halt. Sure, we can easily associate a number of software applications with autonomous driving, but what about a raw material like steel? When we hear “driverless car,” steel probably does not come to mind, although maybe it should?
“For some reason, people understand that automobiles are new technology but they don’t understand that steel is a new technology too,” said Jody N. Hall, Ph.D., Vice President, Automotive Market, Steel Market Development Institute.
The Steel Market Development Institute represents steel companies and works closely with the automotive industry to provide the proper grades based on the application. The organization is also focused on educating the greater automotive industry on the uses and benefits of the material. ArcelorMittal, a multinational steel manufacturing corporation headquartered in Boulevard d’Avranches, Luxembourg, shares a similar vision. Blake Zuidema, Director of Automotive Product Applications, spends a great deal of time with the automakers.
“My team works with the OEM body structure design community to try and understand what kinds of material properties are required in order to achieve all of their design objectives,” he said.
Steel is widely utilized in the automotive industry, encompassing a significant portion of any given vehicle’s chassis, body, and overall structure. Full-size trucks from General Motors, RAM, and Ford, for example, employ a high-strength steel frame to accommodate heavy payloads. Other vehicles, from minivans to crossovers, use steel for occupant safety and enjoyable driving dynamics.
SMDI’s display at the 2017 North American International Auto Show at the Cobo Center in Detroit, Michigan. Pictured here is the new Chrysler Pacifica. The individual colors correspond to different materials, including their grades and properties, used to manufacture the vehicle. Photo: SMDI.
Structural Integrity
Part of the steel industry’s focus with autonomous driving is providing the designers of the technology a durable material that can be shaped around their components. The idea is that if the sensors associated with automated driving are protected, they are more effective.
“If we are able to give them a better performing material, then they can have a more efficient design,” Dr. Hall said. “You need some kind of structure to hold all of those sensors in place and a steel intensive one can better protect them.”
It’s not just protecting the sensors, however. Even in the era of driverless cars, occupant protection is still paramount. Indeed, one of the promises of autonomous driving is an accident free world, but perhaps those glasses are a little to rose colored?
“I would love to believe that when we move to autonomous vehicles that we will eliminate traffic accidents but the simple fact is that is not going to be 100 percent true,” Zuidema said. “I think we are going to dramatically reduce the number of traffic accidents but no technology is perfect.”
Zuidema points to both the commercial airline and shipping industries and how they run on automated and connected systems. Despite this, planes still crash and ships still sink.
“Sensors can fail or be occluded by the elements; driving conditions can deteriorate to the point where the sensors may tell the wheels to do something, but if there is no traction, the vehicle is basically a ballistic object,” Zuidema explained. “There is no reason to believe autonomous vehicles, despite the technology, are going to be free of accidents.”
SMDI, ArcelorMittal, and other advocates for steel believe autonomous cars will need passive safety features as much, if not more so, than active ones. Further to that, the future autonomous car needs to be programmed not only to understand the world around it – streets, road signs, traffic etc. – but to understand itself.
Expect The Unexpected
Let’s say an autonomous car encounters a runaway baby carriage and is, in this scenario, left with only two choices since stopping in time is not possible. One, it hits the baby carriage, or swerves to miss it, but will collide with some other object – wall, telephone pole, dump truck etc. – in other words, there is no promising end to this situation. If the car understands it has a very strong safety cage constructed from a very durable material, and highly engineered passive safety systems, that will impact its decision.
On the other hand, if the vehicle understands itself as has having a safety cage of less integrity, and passive safety systems that are, from an engineering perspective, neglected, because we have put too much faith in the accident free promise of autonomy, then its decision could be very different. It may, in fact, hit the baby carriage.
“I realize this may be a stretch but these are the kinds of things you have to think about when it comes to autonomous vehicles,” Zuidema said. “When I think autonomous, I am still thinking the safety cage of the car is going to be equally important, if not more important.”
The three-point safety belt as it appeared in the Volvo PV 544 in 1959. According to the National Highway Traffic Safety Administration, seat belts saved nearly 13,000 lives in 2014. Photo: Volvo Car Corporation.


Stable Paths & Bold Visions
One of the most prominent examples of safety in the automotive industry is Volvo. Nils Bohlin, a Volvo engineer, is credited with the world’s first 3-point safety belt in 1959. The seat belt is arguably the greatest, most iconic passive safety device of all time, saving countless lives over the last near 60 years. This legacy is carried on through the automaker’s new Scalable Product Architecture (SPA), which utilizes hot formed steel and serves as framework for future Volvos.
“The use of hot-formed, Boron high-strength steel is a tradition for Volvo and provides several benefits in terms of safety and production,” said Jim Nichols, Technology and Product Communications Manager, Volvo Car USA LLC. “SPA allows us to add additional strength and rigidity to our cars while reducing weight and improving crash performance.”
Volvo’s vision is that by 2020 no one should be killed or seriously injured in a new Volvo. That’s a full five years before the general consensus on when autonomous cars are expected to be released.
“SPA gets us closer to this vision via additional high-strength steel and an electrical architecture that can support new safety technologies,” Nichols explained. “With the SPA platform, we were able to build both an electrical and network infrastructure that allows for the placement of additional sensors, which support autonomous driving technology.”
Dr. Hall believes such infrastructures are most effective when steel is in the picture.
“We want to deliver the structure of a vehicle that engineers can utilize to give good ride quality, durability, and safety performance,” she said. “However, today, we need to give the sensors for autonomous technology a pathway, and so we design the shape of the steel accordingly.”
Volvo’s belief in autonomous driving is well publicized and they have, in recent times, championed it with much vigor. And while SPA will, with its electrical and network infrastructure, support the technology necessary for autonomous driving, the basis is still on durability and safety.
“Thirty percent of the XC90 architecture, for example, is made from Boron steel, which is among the strongest materials available today,” Nichols said. “This material mix allows us to deflect and absorb crash forces, keeping drivers and passengers safer.”
A Volvo XC60 endures a frontal crash test at 35 mph. Photo: Volvo Car Corporation.
Cost & Energy Consumption
In addition to safety is cost, another concern consumers will inevitably have when faced with an autonomous car. One school of thought suggests going with an aluminum or carbon fiber intensive body to cut weight and therefore, reduce the number of batteries. Since battery and electric powertrains are often associated with autonomous vehicles, steel proponents are implementing strategies accordingly.
“In the past, batteries were very expensive and if you could reduce the number of batteries you needed for a given range of performance, you could reduce the cost of the car,” Zuidema said. “What we see now is the cost of batteries coming down – the marginal costs are such that it is cheaper to make the vehicle a little bit heavier out of steel, and even though you will need slightly more battery storage, the cost of the batteries is nowhere near the cost of converting to aluminum or carbon fiber.”
Steel advocates also point to the environmental benefits during manufacturing, especially as autonomous cars have the potential to reduce emissions themselves. Manufacturing an automobile from steel requires less electricity and CO2, thereby generating a smaller carbon footprint.
“Steel by its very nature requires far less energy during the production phase than other materials like aluminum,” Zuidema explained. “It takes a lot more energy to take aluminum oxide and convert it into pure aluminum metal than it does to take iron oxide and turn it into pure iron.”
General Motors is now testing autonomous technology in Michigan. The Chevy Bolt EVs for the tests feature advanced autonomous systems, along with other hardware designed for occupant safety, like ten standard airbags. The new Chevy Bolt EV utilizes high-strength steel extensively throughout its body structure for additional safety. Photo: General Motors.


Wings & Wheels
While some automakers predict as early as 2021, it’s hard to say just what the autonomous market will become once the vehicles arrive. My emotions on autonomous driving are mixed, although that was not always the case. When I first learned about it, and when we first began covering it here for Automoblog, I was all for it. Today, I am not so sure, but I want to believe in the autonomous car and I will give it a chance. I want to believe the forthcoming autonomous automotive system will give us all the benefits it promises and more.
Imagine a world free of accidents with better infrastructure and reduced emissions.
It’s nothing short of awesome.
However, I am not willing to give up my seat belt for the autonomous automotive system. I am not willing to give up the usage of high-strength steels either that keep us safe during a collision. I will give autonomy a chance but I won’t give it my entire blind faith. Neither should you.
Even though airplanes are the safest form of travel, I still buckle up when I board, and am mindful the nearest exit might be behind me. I even stay awake for the safety presentation. Like we often do with wings in the sky, we take for granted the basics that keep us safe. We should not replicate this with our wheels on the ground, autonomous or otherwise. Our faith in the autonomous system is best predicated upon the understanding of why the modern sensor needs the proven material, and why, for the sake of all the promises of autonomy, they must work in tandem.
Carl Anthony is Managing Editor of Automoblog and resides in Detroit, Michigan. 



Check out these Automotive tips

Powered by WPeMatico

http://carsecret.atspace.eu/blog/high-strength-steel-the-ally-of-autonomy/

Mercedes-AMG GT Concept: The Performance Sedan Of The Future

Mercedes-AMG GT Concept: The Performance Sedan Of The Future

Mercedes-Benz is, at their heart, a big sedan company. Sure, they might build devastatingly quick race cars now and then. They might build beautiful Gullwings every quarter century or so, but at their heart, big, fast sedans is what Mercedes-Benz does.
Witness the Mercedes-AMG GT Concept.
What Ferrari is to road going sports cars, Mercedes-Benz is to big performance sedans: The Benchmark. With the new Mercedes-AMG GT Concept the Stuttgart company just rolled out at Geneva, they hope to redefine what that benchmark is.
Proper Introductions
What the Mercedes-AMG GT Concept does is successfully blend a bunch of odd, disparate elements. The Mercedes-AMG GT Concept wants to be all things to all people. It has the practicality of a four-door sedan, yet the styling of a coupe – working the now fashionable idea of a four-coupe to great effect – it has bags of power as only an engine-obsessed company like Mercedes-Benz can have, yet it gets great gas mileage and pollutes very little since it’s a hybrid; it is most definitely not a sports car, yet it cops design elements from its corporate sibling the AMG GT sports car.
Usually, this does not work. It does not work at all, and usually fails spectacularly. Look at the Pontiac Aztek. That tried to be all things to all people too, and besides ending up a radiating failure, its only real notoriety is that it was the car Walter White drove in Breaking Bad.
The Mercedes-AMG GT Concept works.
Quote Worthy
“With the Mercedes-AMG GT Concept, we are giving a preview of our third completely independently developed sports car and are extending the attractive AMG GT family to include a four-door variant,” said Tobias Moers, Chairman of the Board of Management of Mercedes-AMG GmbH. “With our AMG GT Concept, that means a combination of an ultra-modern V8 gasoline engine and a high-performance electric motor, both intelligently networked with an extremely powerful yet lightweight battery concept.”
Moers also underscored the performance aspects.
“This hybrid powertrain offers an impressive electric range and the opportunity to generate a system output of up to 805 horsepower in its last level of development, and covers the sprint from 0-60 mph in less than three seconds – which corresponds to the performance of a super sports car,” he said.
Okay, let’s break down what Herr Moers just said.
Photo: Mercedes-Benz USA.


Perception Versus Reality
Look, we could delve deeply into the styling of the car, but ultimately all that is subjective. I can trust anyone with eyes out there to form an opinion on the Mercedes-AMG GT Concept’s looks, and I would wager that most people would find them pleasing. What is not subjective is the drivetrain.
As Herr Moers pointed out, this monster reels out 805 horsepower, which is comparable with the upcoming Ferrari Superfast. Let that sink in for a bit.
Yes, of course this thing is going to weigh more, so it’s going to need a lot of power to hit performance benchmarks like 0 to 60 in less than 3 seconds. But still, that’s a lot of go.
The performance-based hybrid system starts off with a handcrafted AMG 4.0L V8 biturbo engine, mated to an additional, powerful electric motor. Obviously the electric motor is critical to getting this thing to scoot to 60 mph in less than three seconds. The power generated from both sources gets routed to the Bahn via a fully variable AMG performance 4MATIC+ all-wheel drive system. Not only is this a benefit in cruddy weather, it also helps with the prodigious power output in general. Furthermore, with torque vectoring, each wheel can receive torque individually, resulting in a perceptible increase in performance.
Photo: Mercedes-Benz USA.
Track Inspired Performance & Efficiency
There are three operating modes for the AMG GT Concept. It can drive on the electrical system alone, just the combustion engine, or with an optimal combination of both as a hybrid. So, you could drive it as just an EV, sort of like a big Tesla, in a way. You could go with just the turbo V8, in full-on old school mode. Or you could be the clever ape and use both and get all the performance and efficiency you can handle.
The operating strategy of the AMG GT Concept is derived from the hybrid powerpack of the Mercedes Petronas AMG Formula 1 race car that has been kicking butt and taking names for the past three seasons. Three? Four? I can’t remember, and frankly, it’s been going on for far too long.
The AMG GT Concept hybrid system was developed in cooperation with engineers at Mercedes-AMG HPP High Performance Production GmbH. Just like in the Formula 1 car, the AMG GT Concept’s battery is charged while the vehicle is driven so you have maximum electrical power available at all times.
Photo: Mercedes-Benz USA.


Future Tastes
“The AMG GT Concept gives a sneak preview of the exterior design coming to the series production model,” according to a Mercedes-Benz press release.
That means they are going to build this thing, but like all show cars, what ends up in the dealership won’t be exactly what you see here. All show cars have a certain amount of gee-wiz stuff on them – gyroscopic self-leveling ashtrays and such. That’s the sort of stuff that doesn’t make it to production.
What will make it, however, will be the general look of the AMG GT Concept and its innovative, powerful hybrid drive system. No word on when it will arrive or what the price will be, but the AMG GT Concept sure seems close to production. It’s also not too wild of a guess to say this thing will cost many, many dollars. In the meantime, the Mercedes-AMG GT Concept is on display at the 87th Geneva International Motor Show.
Tony Borroz has spent his entire life racing antique and sports cars. He means well, even if he has a bias towards lighter, agile cars rather than big engine muscle cars or family sedans.
Mercedes-AMG GT Concept Gallery














Photos & Source: Mercedes-Benz USA



Check out these Automotive tips

Powered by WPeMatico

http://carsecret.atspace.eu/blog/mercedes-amg-gt-concept-the-performance-sedan-of-the-future/